This kit is no longer in production
We have replaced the MT1514A and MT1514B with a new, more versatile design which can be used with 1", 1.4" or 2" compression drivers. The Flex 15
utilises the SC series of horn flares, which use a common cut out size for 5 different horn flares.
This is a complete flatpack kit to build the cabinet for the JAM Systems MT1514A speaker, designed for a 15" LF driver and an Oberton H1464 1.4" entry throat horn flare.
2 x side panels, with mitred angles. Also features CNC cutouts and recesses for 3402 steel bar handles.
1 x Rear panel with mitred angled edges. Precut with recess for 87160 angled connector dish.
1 x Top Panel with curved front edge for continuous curve when stacking multiple panels
1 x Bottom Panel with curved front edge.
1 x Middle brace
1 x Angled Reflex Port
2 x curved grill supports. 1 has no cutouts, this fits the top of the speaker, the second has two recesses on the front, and acts as an extension to the reflex port with the recesses reducing the port extension.
The front panel is cut from high quality 18mm birch ply, and the other panels are 15mm high quality birch ply.