 |
| |||||
| ||||||||||||
Convair Crossover X1013 4 ohm LF 8 ohm B&C DE610 HF
This crossover was designed for use in a full range cabinet with a 4 ohm woofer and an 8 ohm tweeter. The crossover frequency is approximately 1.5khz - a non-standard configuration is used to equalise the compression driver making it impossible to specify exact crossover point.
Linkwitz-Riley second order filters are utilised, along with attenuation and equalisation for the HF. The tuning is designed specifically for the B&C DE610, although other compression drivers with a similar response will also work.
In the initial design process, 2 x Eminence Delta 15 (8 ohm) were used for woofers, and a Faital Pro LTH142 horn flare was used on the DE610 compression driver.
Power handling is approximately 600-800W.
Linkwitz-Riley second order filters are utilised, along with attenuation and equalisation for the HF. The tuning is designed specifically for the B&C DE610, although other compression drivers with a similar response will also work.
In the initial design process, 2 x Eminence Delta 15 (8 ohm) were used for woofers, and a Faital Pro LTH142 horn flare was used on the DE610 compression driver.
Power handling is approximately 600-800W.
Detailed specifications unavailable, please EMAIL the sales office for additional information.
| Other Convair Electronics products similar to Convair Crossover X1013 4 ohm LF 8 ohm B&C DE610 HF: |
|
Seen this cheaper?
If you find 'Convair Crossover X1013 4 ohm LF 8 ohm B&C DE610 HF' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
If you find 'Convair Crossover X1013 4 ohm LF 8 ohm B&C DE610 HF' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
Product reviews
Write a reviewWrite a review
You must be logged in to submit a review. Log in