 |
| |||||
| ||||||||||||
Convair Electronics Crossover designed for use with the DCX464 8 ohm Compression Driver. This crossover is VERY specifically for the DCX464 only, and is not intended for use in other applications, as the crossover slopes have been tailored to match the frequency response and impedance of the DCX464. The Crossover was developed with multiple measurements of the DCX464 mounted on an ME464 Horn flare.
SPECIFICATION
- Type: Two Way Crossover with HF attenuation and EQ
- Nominal Frequency: 3500 Hz
- Slope: 12dB/octave - LR12 alignment on low pass
- Impedance: 8 ohms
- RMS Power: 750W
- Program Power: 1200W
- Dimensions:134mmx106mm
- Polarity: HF device to be connected with inverted polarity to maintain phase response over crossover region.
Convair Electronics Filters and Crossovers are hand built in the UK to an exacting standard. Through the use of quality components, insertion points are kept to a minimum and crossover points are kept within tight tolerances. Besides sounding great these filters and crossovers are constructed to withstand a rough life on the road. Custom specifications are available for larger orders.
Detailed specifications unavailable, please EMAIL the sales office for additional information.
| Other Convair Electronics products similar to Convair Custom Crossover for B&C DCX464 8 ohm Co-axial: |
|
If you find 'Convair Custom Crossover for B&C DCX464 8 ohm Co-axial' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.