 |
| |||||
| ||||||||||||
Connector Dish with 2 x NL4MPXX Speakons and Terminal Block
Tired of soldering wires to Speakons?
This handy pre-assembled Speakon connector plate comes ready to fit to your cabinet, to save you the time and inconvenience of soldering or crimping. It has 4 screw terminals which will accept wire of up to 2.5 sq mm CSA. The two speakon sockets are linked together for daisy chaining speaker cabinets
Overall dimensions of mounting panel: 136mm wide x 90mm high.
Cutout: 110mm x 65mm.
Depth of assembled connector panel: 55mm
This handy pre-assembled Speakon connector plate comes ready to fit to your cabinet, to save you the time and inconvenience of soldering or crimping. It has 4 screw terminals which will accept wire of up to 2.5 sq mm CSA. The two speakon sockets are linked together for daisy chaining speaker cabinets
Overall dimensions of mounting panel: 136mm wide x 90mm high.
Cutout: 110mm x 65mm.
Depth of assembled connector panel: 55mm
Copper thickness: 2.8 mils (0.0711mm)
Average track width linking between pins: 12mm
The tracks between pins feature a high surface area, and over the short distance have a VERY low resistance calculated to be approximately 0.001 ohms (it's so small we can't physically measure it).
The PCB tracks for the Speakon link have a Current carrying capacity in excess of 25 amps for daisy chaining speakers.
Average track width linking between pins: 12mm
The tracks between pins feature a high surface area, and over the short distance have a VERY low resistance calculated to be approximately 0.001 ohms (it's so small we can't physically measure it).
The PCB tracks for the Speakon link have a Current carrying capacity in excess of 25 amps for daisy chaining speakers.
|
| ||||||||||
| Other Tuff Cab products similar to Connector Dish with 2 x NL4MPXX Speakons and Terminal Block: |
|
||
|
|