 |
| |||||
| ||||||||||||||
B&C 21DS115 - 21" 1700W 8 Ohm Loudspeaker
This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, higher sensitivity, lower distortion and better overall performance. The 21DS115 features a 36 mm long, 4.5 inch diameter (116mm) Copper Clad Aluminum Wire voice coil. With a 1700watt AES power rating, 99 dB sensitivity, and over 16.5mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range, even approaching the performance of our 6” voice coil alternatives.
- 3400 W continuous program power capacity
- 116 mm (4.5 in) four layer aluminum voice coil
- 35 - 500 Hz response
- 99 dB sensitivity
- Excursion optimized lead wires (woven through spider)
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
- Aluminium demodulating ring for very low distortion
Specifications:
Design:
Parameters:
Mounting And Shipping Info:
- Nominal diameter 530 mm (21.0 in)
- Nominal impedance 8 ohms
- Minimum impedance 6.6 ohms
- Nominal power handling 1700 W
- Continuous power handling 3400 W
- Sensitivity (1W/1m) 99.0 dB
- Frequency range 35 - 500 Hz
- Voice coil diameter 116 mm (4.5 in)
- Winding material Aluminium
- Former material Glass Fibre
- Winding depth 40 mm (1.42 in)
- Magnetic gap depth 14 mm (0.55 in)
- Flux density 0.8 T
Design:
- Surround shape Triple Roll
- Cone shape Radial
- Magnet material Neodymium Inside Slug
- Spider Double Silicone
- Pole design T-Pole
- Woofer cone treatment TWP Waterproof Both Sides
- Recommended enclosure 170.0 dm3 (6 ft3)
- Recommended tuning 40 Hz
Parameters:
- Resonance 34 Hz
- Re 5.1 ohms
- Qes 0.28
- Qms 10.2
- Qts 0.27
- Vas 204.0 dm3 (6.99 ft3)
- Sd 1620.0 cm2 (260.4 in2)
- Reference efficiency 2.7 %
- Xmax 16.5 mm
- Xvar 13.5 mm
- Mms 404 g
- Bl 39.3 Txm
- Le 4.9 mH
- EBP 121 Hz
Mounting And Shipping Info:
- Overall diameter 547 mm (21.54 in)
- Bolt circle diameter 527 mm (20.7 in)
- Baffle cutout diameter 508.0 mm (20.0 in)
- Depth 255 mm (10.04 in)
- Flange and gasket thickness 13 mm (0.51 in)
- Air volume occupied by driver 15.0 dm3 (0.53 ft3)
- Net weight 14.7 kg (32.41 lb)
- Shipping weight 17 kg (37.48 lb)
- Shipping box 590x590x300 mm (23.1x23.1x11.8 in)
- Recone Kit RCK21DS1158
| Other B & C products similar to B&C 21DS115 - 21" 1700W 8 Ohm Loudspeaker: |
|
Seen this cheaper?
If you find 'B&C 21DS115 - 21 inch 1700W 8 Ohm Loudspeaker' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
If you find 'B&C 21DS115 - 21 inch 1700W 8 Ohm Loudspeaker' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
B&C 21DS115 - 21" 1700W 8 Ohm Loudspeaker PDF data sheet (2 Mb)
View B & C website for more information for B & C 21DS115
SEARCH results for other drivers with similar T-S Parameters to B&C 21DS115 - 21" 1700W 8 Ohm Loudspeaker
What do these labels mean?
- Original
- We believe this is an exact match for the original part, although we can't always verify the factory specification.
- Aftermarket
- A lower-cost replacement made to match the original part's size, shape and fit. Sound and performance may differ.
- Equivalent
- A very close match. The original may have been a slightly different factory version.
- Alternative
- A different part we recommend for this model when the usual replacement is unavailable. Check any fit or installation notes before ordering.
| Equipment | Original part | Match type |
|---|
Ask about this product
Product reviews
Write a reviewWrite a review
You must be logged in to submit a review. Log in