B&C 10NW76 10" 400W 16 Ohm Driver
- 800 W continuous program power capacity
- 76 mm (3 in) copper clad aluminum wire voice coil
- 65 - 3500 Hz response
- 96.3 dB sensitivity
- Neodymium magnet allows a very light yet powerful motor assembly
- Aluminium demodulating ring for very low distortion
- Ventilated voice coil gap for reduced power
Technical specifications
- Nominal Diameter: 250 mm (10.0 )
- Overall Diameter: 261 mm (10.28 )
- Bolt Circle Diameter: 246 mm (9.69 )
- Baffle Cutout Diameter: 233.0 mm (9.17 )
- Overall Depth: 119 mm (4.69 )
- Flange/Gasket Thickness: 13 mm (0.51 )
- Impedance: 16 ohm
- Minimum Impedance: 12.3 ohm
- Program Power: 800 W
- Power: 400 W
- Sensitivity: 96.8 dB
- Frequency Range: 65 Hz
- Voice Coil Diameter: 76 mm (3.0 )
- Voice Coil Material: CCAW
- Voice Coil Former: Glass Fibre
- Voice Coil Depth: 19.0 mm (0.75 )
- Magnetic Gap Depth: 10.0 mm (0.39 )
- Cone Shape: Curvilinear
- Cone Treatment: WP Waterproof Front Side
- Surround Type: Triple Roll
- Spider: Single
- Magnet Material: Neodymium
- Pole Design: T-Pole
- Flux Density: 1.35 T
- Driver Displacement Volume: 1.5 L
- Recommended Enclosure: 26.0
- Recommended Tuning: 65
Thiele and small parameters
- Resonance (Fs) - 68 Hz
- DC Resistance (Re) - 10.0 Ohm
- Electrical Q (Qes) - 0.3
- Mechanical Q (Qms) - 8.7
- Total Q (Qts) - 0.29
- Compliance Equivalent Volume (Vas) - 18.5 L
- Diaphragm Area (Sd) - 320.0 cm2
- Reference Efficiency (Eta Zero) - 1.88 %
- Maximum Linear Excursion (Xmax) - 7.0 mm
- Xvar (Xvar) - 7.5
- Moving Mass - System (Mms) - 42.5 g
- Force Factor (BL) - 24.7 Tm
- Voice Coil Inductance (Le) - 0.58 mH
- Efficiency Bandwidth Product (EBP) - 226
Shipping Information
- Net Weight: 3.8 kg
- Shipping Weight: 4.4 kg
- Shipping Box: 295x314x175
- Multipack Quantity: 1
| Other B & C products similar to B&C 10NW76 10" 400W 16 Ohm Driver: |
|
SEARCH results for other drivers with similar T-S Parameters to B&C 10NW76 10" 400W 16 Ohm Driver
View B & C website for more information for B & C 10NW76