|
|
B&C 12TBX100 - 12" 1000W 8 Ohm Loudspeaker
- 2000 W continuous program power capacity
- 100 mm (4 in) copper voice coil
- 45 - 1000 Hz response
- 95 dB sensitivity
- Aluminium demodulating ring allows a very low distortion figure
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
Specifications
- Nominal diameter 320 mm (12.0 in)
- Nominal impedance 8 ohms
- Minimum impedance 6.3 ohms
- Nominal power handling 1000 W
- Continuous power handling 2000 W
- Sensitivity (1W/1m) 95.0 dB
- Frequency range 45 - 1500 Hz
- Voice coil diameter 100 mm (4.0 in)
- Winding material Copper
- Former material Glass Fibre
- Winding depth 25 mm (1.0 in)
- Magnetic gap depth 12 mm (0.5 in)
- Flux density 1.1 T
Design
- Surround shape Triple Roll
- Cone shape Radial
- Magnet material Ferrite
- Spider Double Silicone
- Pole design T-Pole
- Woofer cone treatment TWP Waterproof Both Sides
- Recommended enclosure 40.0 dm3 (1.41 ft3)
- Recommended tuning 43 Hz
Parameters
- Fs 42 Hz
- Re 5.1 ohms
- Qes 0.27
- Qms 6.9
- Qts 0.26
- Vas 37.5 dm3 (1.3 ft3)
- Sd 531.0 cm2 (82.0 in2)
- Reference efficiency 1.15 %
- Xmax 9.0 mm
- Xvar 11.0 mm
- Mms 119 g
- Bl 25.5 Txm
- Le 1.6 mH
- EBP 155 Hz
Mounting and Shipping Information
- Overall diameter 319 mm (12.5 in)
- Bolt circle diameter 299 mm (11.8 in)
- Baffle cutout diameter 281.0 mm (11.1 in)
- Depth 135 mm (5.3 in)
- Flange and gasket thickness 13 mm (0.5 in)
- Air volume occupied by driver 4.2 dm3 (0.15 ft3)
- Net weight 11.8 kg (26.0 lb)
- Shipping weight 12.4 kg (27.3 lb)
- Shipping box 340x340x170 mm (13.4x13.4x6.7 in)
Other B & C products similar to B&C 12TBX100 - 12" 1000W 8 Ohm Loudspeaker: |
|
SEARCH results for other drivers with similar T-S Parameters to B&C 12TBX100 - 12" 1000W 8 Ohm Loudspeaker