 |
| |||||
| ||||||||||||||
B&C 21DS115 - 21" 1700W 4 Ohm Loudspeaker
This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, higher sensitivity, lower distortion and better overall performance. The 21DS115 features a 36 mm long, 4.5 inch diameter (116mm) Copper Clad Aluminum Wire voice coil. With a 1700watt AES power rating, 99 dB sensitivity, and over 16.5mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range, even approaching the performance of our 6” voice coil alternatives.
- 3400 W continuous program power capacity
- 116 mm (4.5 in) four layer aluminum voice coil
- 30 - 1000 Hz response
- 99 dB sensitivity
- 60 mm peak-to-peak excursion before damage
- Neodymium magnet allows a very high force factor and linear excursion
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
- Aluminium demodulating ring for very low distortion
Specifications:
Design:
Parameters:
Mounting And Shipping Info:
- Nominal diameter 530 mm (21.0 in)
- Nominal impedance 4 ohms
- Nominal power handling 1700 W
- Continuous power handling 3400 W
- Sensitivity (1W/1m) 99.0 dB
- Frequency range 30 - 1000 Hz
- Voice coil diameter 116 mm (4.5 in)
- Winding material Aluminium
- Former material Glass Fibre
- Winding depth 36 mm (1.42 in)
- Magnetic gap depth 14 mm (0.55 in)
Design:
- Surround shape Triple Roll
- Cone shape Radial
- Magnet material Neodymium Inside Slug
- Spider Double Silicone
- Pole design T-Pole
- Woofer cone treatment TWP Waterproof Both Sides
- Recommended enclosure 130.0 dm3 (4.59 ft3)
- Recommended tuning 40 Hz
Parameters:
- Fs 32 Hz
- Qes 0.22
- Qts 0.21
- Sd 1620 cm² (251.1 in²)
- Xmax 15 mm
- Mms 409 g
- Le 2.3 mH
- Re 2.1 Ω
- Qms 9.8
- Vas 219 dm³ (7.73 ft³)
- η0 3.3 %
- Xvar 11.5 mm
- Bl 28.6 Tm
- EBP 145 Hz
Mounting And Shipping Info:
- Overall diameter 547 mm (21.54 in)
- Bolt circle diameter 527 mm (20.7 in)
- Baffle cutout diameter 508.0 mm (20.0 in)
- Depth 255 mm (10.04 in)
- Flange and gasket thickness 13 mm (0.51 in)
- Air volume occupied by driver 15.0 dm3 (0.53 ft3)
- Net weight 14.8 kg (32.63 lb)
- Shipping weight 17.2 kg (37.92 lb)
- Shipping box 590x590x300 mm (23.1x23.1x11.8 in)
| Other B & C products similar to B&C 21DS115 - 21" 1700W 4 Ohm Loudspeaker: |
|
Seen this cheaper?
If you find 'B&C 21DS115 - 21 inch 1700W 4 Ohm Loudspeaker' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
If you find 'B&C 21DS115 - 21 inch 1700W 4 Ohm Loudspeaker' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
B&C 21DS115 - 21" 1700W 4 Ohm Loudspeaker PDF data sheet (793 kb)
View B & C website for more information for B & C 21DS115
SEARCH results for other drivers with similar T-S Parameters to B&C 21DS115 - 21" 1700W 4 Ohm Loudspeaker
What do these labels mean?
- Original
- We believe this is an exact match for the original part, although we can't always verify the factory specification.
- Aftermarket
- A lower-cost replacement made to match the original part's size, shape and fit. Sound and performance may differ.
- Equivalent
- A very close match. The original may have been a slightly different factory version.
- Alternative
- A different part we recommend for this model when the usual replacement is unavailable. Check any fit or installation notes before ordering.
| Equipment | Original part | Match type |
|---|
Ask about this product
Product reviews
Write a reviewWrite a review
You must be logged in to submit a review. Log in