 |
| |||||
| ||||||||||||||
Beyma FD2XA 1.8kHz 2-way Passive Crossover for 12XA30Nd and 15XA38Nd
These 2 way passive filters have been specifically designed to be used with the XA and XC Beyma coaxials, in order to achieve
an optimum performance of these drivers.
These filters offer the possibility of an additional attenuation of the high frequency unit. Use of this attenuation is entirely optional, optimum performance of the intended 15XA38Nd and 12XA30Nd coaxial drivers is achieved without using it. If required, the attentuation circuit can be activated by removing the aluminium bridge labelled "AT" on the back surface of the board.
From left to right, the connections are HF , HF-, LF , LF-, IN-, IN .
These filters offer the possibility of an additional attenuation of the high frequency unit. Use of this attenuation is entirely optional, optimum performance of the intended 15XA38Nd and 12XA30Nd coaxial drivers is achieved without using it. If required, the attentuation circuit can be activated by removing the aluminium bridge labelled "AT" on the back surface of the board.
From left to right, the connections are HF , HF-, LF , LF-, IN-, IN .
Specifications:
- Crossover frequency 1.8 kHz
- Power capacity 600W
- Low / High frequency impedance 8/16 Ohms
- Attenuation slope 12dB/oct
- H.F. attenuation 0/1.5dB
| Other Beyma products similar to Beyma FD2XA 1.8kHz 2-way Passive Crossover for 12XA30Nd and 15XA38Nd: |
|
Seen this cheaper?
If you find 'Beyma FD2XA 1.8kHz 2-way Passive Crossover for 12XA30Nd and 15XA38Nd' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
If you find 'Beyma FD2XA 1.8kHz 2-way Passive Crossover for 12XA30Nd and 15XA38Nd' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
View Beyma website for more information for Beyma FD2XAProduct reviews
Write a reviewWrite a review
You must be logged in to submit a review. Log in