2-way Crossover for RCF CX12G251 12" co-ax with EQ

This crossover was designed for use with the RCF CX12G251, but should work with most 12" co-axial drivers, it has some EQ on the mid frequencies, to remove some of the 'honk' frequently present between 2khz and 4khz on many compression drivers.
Convair Filters and Crossovers are hand built in the UK to an exacting standard. Through the use of quality components, insertion points are kept to a minimum and crossover points are kept within tight tolerances. Besides sounding great these filters and crossovers are constructed to withstand a rough life on the road. Custom specifications are available for larger orders.

SPECIFICATION

• Type: Two Way Crossover
• Nominal Frequency: 2KHz low pass, 3KHz Hi pass
• Slope: 12dB/octave
• Impedance: 8 ohms
• RMS Power: 500W (THD approx. 0.5-0.7%)
• Program Power: 1000W (THD approx. 1.0-1.5%)
• Dimensions: 118 x 105 x 46mm
• Insertion loss better than 0.4dB, Crossover point within +/-10% of stated value.

A two way crossover separates the low and high frequencies to a woofer and tweeter respectively. This results in better sound quality and is essential to protect the high frequency driver.

We are able to build to order most common values between 0.1mH and 7mH, subject to limitations of bobbin size and wire diameter. Please email the sales office