![]() |
| |||||

| ||||||||||
Build a compact two-way installation loudspeaker with the JAM Systems BCX8A kit. Each kit pairs a black birch plywood cabinet with a B&C 8CX21 8-inch coaxial driver and a Convair X1006 passive crossover. The cabinet comes with a curved perforated grille and an adjustable mounting bracket for aiming the speaker towards the listening area.
The 8CX21 places its high-frequency compression driver at the centre of the bass/mid cone. Both sections radiate along the same axis, and B&C specifies a nominal 100° conical coverage angle. That wide pattern makes the kit a practical choice for speech and background music in spaces such as cafés, meeting rooms and small venues.
The X1006 splits the signal from one amplifier channel between the bass/mid and treble sections. One kit builds one passive loudspeaker. The cabinet is supplied assembled, with the driver and crossover supplied separately for fitting and wiring.
Kit contents
- 1 × JAM Systems BCX8A birch plywood cabinet with front grille and adjustable mounting bracket (JMSBCX8A)
- 1 × B&C 8CX21 8-inch coaxial driver, 8 Ohm version with Faston spade terminals (BAC8CX21A)
- 1 × Convair Electronics X1006 two-way passive crossover for the 8CX21 (CNVX1006)
Cabinet and crossover
- Cabinet finish – textured black with a curved, perforated front grille
- Mounting – side-pivoting U-bracket
- Crossover connections – one amplifier input and separate low-frequency (LF) and high-frequency (HF) outputs, each marked for polarity
B&C 8CX21 driver specifications
- Frequency range – 75 Hz to 20 kHz
- Nominal coverage – 100° conical
- LF power handling – 200 W nominal, 400 W continuous programme
- HF power handling – 25 W nominal, 50 W continuous programme
- Sensitivity at 2.83 V – 94 dB LF, 101 dB HF
- Nominal impedance – 8 Ohm per section
- Minimum impedance – 6.1 Ohm LF, 7.2 Ohm HF
- LF construction – 52 mm copper voice coil on a Kapton former, ferrite magnet and water-resistant treatment on the front of the cone
- HF construction – 36 mm aluminium voice coil, polyester diaphragm and 34.5 mm exit
Driver mounting dimensions
- Outside diameter – 225 mm
- Baffle cut-out – 187 mm diameter
- Mounting bolt circle – 210 mm diameter
- Driver depth – 135 mm
- Flange and gasket thickness – 11 mm
Driver parameters and service parts
- LF resonance and damping – Fs 74 Hz, Qts 0.36, Qes 0.39, Qms 4.1
- LF compliance and cone area – Vas 15 litres, Sd 220 cm²
- LF excursion – Xmax ±5 mm
- LF moving mass and force factor – Mms 21 g, BL 11.5 T·m
- LF electrical parameters – DC resistance 5.2 Ohm, inductance 1.2 mH
- Replacement parts for the 8CX21 – LF recone kit RCK008CX218, HF diaphragm MMD0128
| Other JAM Systems products similar to JAM Systems BCX8A Cabinet with B&C 8CX21 Driver and X1006 Crossover: |
|

If you find 'JAM Systems BCX8A Cabinet with B&C 8CX21 Driver and X1006 Crossover' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
