Fane Sovereign 12-300 12" 300W 8 Ohm Twin Pack

Medium power 12" driver for use as bass-mid woofer in medium sized vented enclosures or as a mid in small sealed boxes. Usable frequency range: 45Hz - 4.5kHz.

The all new FANE Sovereign Series comprises fifteen cone drivers designed for a broad spectrum of sound reinforcement situations. Midrange, fullrange, bass-mid and dedicated bass applications are comprehensively covered.
Featuring heavy duty FANE pressed steel chassis providing rugged durability and consistant performace in even the most demanding of environments, glass fibre voice coils capable of delivering outstanding power handling capabilities and carefully selected cone materials for smooth tonal characteristics and extended bass response, the FANE Sovereign represents an exciting and versatile answer to the demands of a varied and demanding range of audio applications.

THIELE SMALL PARAMETERS:

• FS Hz 46 Hz
• RE Ohms 5.75 Ohms
• Qms 5.2
• Qes 0.375
• Qts 0.35
• Vas Ltr 114
• Vd litres 0.24
• CMS (mm/N) 0.278
• BL T/m 14.8
• Mms (grms) 43
• Xmax (mm) 4.5
• Sd (cm2) 540
• Efficiency % 2.89
• Le (1kHz) 1.64 mH

ELECTRO ACOUSTIC SPECIFICATIONS:

• Nominal Chassis Diameter 12'
• Impedance 8 Ohms
• Power Handling 300 w (EIA 426A)
• Peak Power (6dB Crest Factor) 1200 w (EIA 426A)
• Usable Frequency Range -6dB 45 Hz - 4.5 kHz
• Sensitivity (1 w - 1 m) 97.5 dB
• Moving Mass inc. Air Load 43 grams
• Minimum Impedance Zmin 6.84 Ohm
• Effective Piston Diameter 10.31' / 262 mm
• Peak Displacement Volume of Cone Vd 0.24 litres
• Magnet Weight 56 oz
• Magnetic Gap Depth 0.39" / 10 mm
• Flux Density 1.1 Tesla
• Coil Winding Height 0.70" / 18 mm
• Voice Coil Diameter 2.5" / 63.5 mm

MATERIALS OF CONSTRUCTION:

• Former Material Glass Fibre
• Voice Coil Copper
• Magnet Material Ferrite
• Chassis Steel
• Cone Paper
• Surround / Edge Termination Polyvinyl Damped Dbl. Half Roll Linen
• Dust Dome Paper
• Connectors Solder Tag
• Polarity Positive Voltage at Red
• Terminal Causes Forward Motion of Cone

MOUNTING / SHIPPING INFORMATION:

• Overall Diameter 12.00' / 304.8 mm
• Flange Height 0.27' / 7 mm
• Baffle Hole Diameter F/M 11.25' / 286 mm
• Baffle Hole Diameter R/M 11.25' / 286 mm
• Gasket Supplied Front & Rear
• Fixing Holes 8x 7.0 mm on 11.75" / 298 mm PCD
• Depth 5.43' / 138 mm
• Weight 11.02 lb / 5.0 kg
• Recommended Enclosure Volume 1.05 - 2.64 cu ft / 30 -75 litres
• Shipping Weight 12.89 lb / 5.85 kg
• Packing Carton Dimensions 165 x 330 x 330 mm