 |
| |||||
| ||||||||||
Twin NL8MP Speakon Dish Kit - unassembled
Fed up of wasting time wiring up links on speakons?
We were too...
So we created this handy little kit which lets you quickly and easily link all pins on a pair of Neutrik NL8MP, with the option to mount screw terminal blocks (supplied with the kit), or just solder 2.5mm wires directly to the PCB. This brings down the assembly time of a speakon panel considerably, when compared to stripping back link wires and direct soldering onto the Speakon.
Small connector wires are required to link across the board.
We were too...
So we created this handy little kit which lets you quickly and easily link all pins on a pair of Neutrik NL8MP, with the option to mount screw terminal blocks (supplied with the kit), or just solder 2.5mm wires directly to the PCB. This brings down the assembly time of a speakon panel considerably, when compared to stripping back link wires and direct soldering onto the Speakon.
Small connector wires are required to link across the board.
Detailed specifications unavailable, please EMAIL the sales office for additional information.
| Other Tuff Cab products similar to Twin NL8MP Speakon Dish Kit - unassembled: |
|
||
|
|
Twin NL8MP Speakon Dish Kit - unassembled is a package consisting of the following items:
 |
2 x PCB Screw Terminal 2 pin 10mm pitch for Crossover PCB |
 10+ IN STOCK |
 |
1 x Tuff Cab Large Dish punched for 2x Neutrik G-Series sockets (NL8 / NLT4 / NL4MPR) This will NOT fit D-Series NL4 sockets, but will fit NL4MPR |
 Usually available in 3-5 weeks |
 |
1 x PCB9006 NL8 PCB for 2 x NL8MPRXX Speakon Dish Designed to fit TUFCONDNLT4L with NL8 at 60mm spacing centre to centre |
10+ IN STOCK |
 |
2 x Neutrik NL8MPRXX 8-pole 30A SpeakON Panel Socket |
13 IN STOCK |
 |
8 x Screw M3 x 10mm Socket Button Screw/Bolt Black |
776 IN STOCK |
 |
1 x PCB Screw Terminal 4 pin 10mm pitch for Crossover PCB - Grey |
10+ IN STOCK |
 |
8 x Tuff Cab M3 Hex Full Nut |
2216 IN STOCK |