Tuff Cab Speaker Refurb Kit - 2.5kg Paint & 5 Textured Rollers

This convenient kit of 2.5kg of black Tuff Cab, 5 textured finish rollers and a roller handle is all you need to give your speakers a tough, road-ready, professional-looking finish, whether they're a new-build project or your trusted old favourites that are carrying a few too many battle scars.

Blue Aran "Tuff Cab" is a thixotropic, viscous coating ideally suited for application by textured roller. The high viscosity ensures it retains the application texture, creating an attractive textured finish.

The coating is flexible yet scratch resistant, highly durable and as it is a self crosslinking acrylic is water resistant when dried. It has been specifically developed for wood, plywood and mdf as a coating for speaker manufacturing. This coating contains no solvents, and as such is easy to use as it require no specialist breathing apparatus or cleaning equipment.. The finished effect with standard Tuff Cab is a satin -gloss finish, the glossiness increasing with each coat. Brushes or application equipment should be washed with warm water whilst still wet.

Read all about Tuff Cab, how to use it, how not to use it, and get some handy tips in our Tuff Cab Article on the Blue Aran Blog

Please Note: Tuff Cab is designed primarily for use as a covering for new speaker cabinets. It is possible for Tuff Cab to not bond perfectly with some existing paint finishes, and you may need to rub down the surface to achieve good adhesion. It is also known that Tuff Cab does not bond well with solvented 2 part car body filler, and it is recommended to avoid using these over large areas before applying Tuff Cab. It is not necessary to use primer on bare wood - Tuff Cab bonds better when applied to bare wood without primer.

HEALTH AND SAFETY DATA SHEET

Tuff Cab is a registered trademark owned by Blue Aran Limited.

A 2.5Kg tub contains approximately 2.5L of paint, the feedback we have received suggests this is sufficient for up to 4 bassbins (15" or 18") with 3-4 light coats per speaker. The FIRST COAT on bare wood takes more paint. The more coats you do, the more durable the final finish.

Available in 2.5kg, 5kg and 25kg containers, and a range of different colours.

Please Note: Tuff Cab is designed primarily for use as a covering for new speaker cabinets and flight cases. It is possible for Tuff Cab to not bond perfectly with existing paint finishes, and you may need to rub down the surface to achieve good adhesion. It is also known that Tuff Cab does not always bondy perfectly with certain types of wood filler, and car body filler, and it is recommended to avoid using these excessively. It is not necessary to use primer on bare wood - Tuff Cab bonds better when applied to bare wood without primer.

HEALTH AND SAFETY DATA SHEET